Jumper Cables Adapter Compatible with Ryobi 18V Battery (2FT)

Key Features

• Newly Upgraded Jumper Starter: The Jump starter cable is exclusively designed for seamless compatibility with Ryobi batteries(Compatible with Ryobi 18V batteries models). (Battery not included)
• Specifications: 8 Gauge Booster Battery Jumper Cables For Jump Starting A Dead Or Weak Battery. Ideal For Trucks, Suvs, Full-Size Cars, Mid-Size Cars And Small/Compact Cars
• Instructions For Use: a. Connect The Red Battery Clamp Of The Jumper Cable To The Positive Terminal (+) Of The Vehicle, And The Black Clamp To The Negative Terminal (-). b. Insert The Battery Into The Adapter And Ensure It Is Securely Locked. c. Attempt To Start The Car. d. Disconnect The Connection Between The Car Battery And Your Tool Battery After Successfully Starting The Car.
• Easy Operation: Insert The Fully Charged Battery Into The Adapter. Connect The Red Clamp To The Positive Terminal Of The Car Battery And The Black To The Negative Terminal. Start Your Vehicle And Disconnect The Cables Clamps Within 30 Seconds.
• Safety Precautions: Not Reverse The Operation Sequence Of The Jump Starter. Please Be Careful When Using This Product, This Item Can Not Be Overloaded, Check Your Device Power Before Using, Please. Do Remove The Product From The Vehicle Within 30 Seconds After The Vehicle Is Started, Or It May Cause Security Incidents. Note: Always Check If Your Power Bank Is Capable Of Supporting Your Car. Keep In Mind, The Jump Starter Doesn’T Convert Voltage/ Step-Down Voltage!

Specifications